AUTOMOTIVE LUBRICANTS
X
MONOGRADE DIESEL ENGINE OIL MOTOROL GALLANT SAE 30 / 40 / 50 API CF

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
SAE GRADES304050---
APPEARANCEVISUALCLEAR TRANSPARENTCLEAR TRANSPARENTCLEAR TRANSPARENT
KIN. VISCOSITY @ 40 °C CstASTM D-44590 - 110125 - 160145 - 210
KIN. VISCOSITY @ 100 °C CstASTM D-4459.3 – 12.512.5 - 16.316.3 - 21.9
VISCOSITY INDEX, MINASTM D-2270959595
FLASH POINT oC MIN.ASTM D-92220230+235
SULPHATED ASH, % , MAXASTM D-874111

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MULTIGRADE ENGINE OIL MOTOROL GALLANT SAE 20W50 / 15W40 API CH4

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
SAE GRADES20W/5015W/40
AppearanceVISUALCLEAR TRANSPARENTCLEAR TRANSPARENT
KIN. VISCOSITY @ 40 °C CstASTM D-445173.55120.4
KIN. VISCOSITY @ 100 °C CstASTM D-44517.513.6
VISCOSITY INDEX (Min)ASTM D-2270110110
Flash point °C (Min)ASTM D-92215210
SULPHATED ASH, % , MAXASTM D-87411
TOTAL BASE NoASTM D-28968.58.5

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MULTIGRADE ENGINE OIL MOTOROL GALLANT SAE 20W40 / 15W40 API CF4

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
SAE GRADES20W/5015W/40
AppearanceVISUALClearClear
KIN. VISCOSITY @ 40 °C CstASTM D-445132121.65
KIN. VISCOSITY @ 100 °C CstASTM D-44514.513.7
VISCOSITY INDEX (Min)ASTM D-2270110110
Flash point °C (Min)ASTM D-92215210
SULPHATED ASH, % , MAXASTM D-8740.70.7
TOTAL BASE NoASTM D-28965.55.5

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
2-STROKE ENGINE OIL MOTOROL 2T API TC

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
GEAR OIL MOTOROL AUTO GEAR SAE EP 90 / 140 API GL 4

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
CHARACTERISTICSTEST METHODTEST VALUETEST VALUE
AppearanceVISUALCLEAR TRANSPARENTCLEAR TRANSPARENT
ColourASTM D-15002.5 - 3.53.0 - 4.5
KIN. VISCOSITY @ 100 °C CstASTM D-4451930
KIN. VISCOSITY @ 40 °C CstASTM D-445237.85485
VISCOSITY INDEX (Min)ASTM D-22709090
Flash point °C (Min)ASTM D-92200220
CORROSION COPPER @150°C 3 HRS MAXASTM D-1301B1B

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MULTIGRADE GEAR OIL MOTOROL AUTOGEAR 85W/140 API GL-5 & MIL-L-2105D

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
SAE GRADES85W/9080W/9085W/14080W/140
AppearanceVISUALClearClearClearClear
KIN. VISCOSITY @ 100 °C CstASTM D-44514.814.326.725.5
KIN. VISCOSITY @ 100 °C CstASTM D-445138.15106.1338.55263.45
VISCOSITY INDEX (Min)ASTM D-2270108124105125
Flash point °C (Min)ASTM D-92210180210180
SP.GRAVITY @29.5 °CASTMD-12980.8750.880.890.89
CORROSION COPPER @150°C 3 HRS MAXASTM D -1301B1B1B1B
Pour point °CASTM D-97-15-30-15-30

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MULTIGRADE GEAR OIL MOTOROL AUTOGEAR 80W/90 API GL-5 & MIL-L-2105E

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
SAE GRADES85W/9080W/9085W/14085W/140
AppearanceVISUALClearClearClearClear
KIN. VISCOSITY @ 100 °C CstASTM D-44514.814.326.725.5
KIN. VISCOSITY @ 40 °C CstASTM D-445138.15106.1338.55263.45
VISCOSITY INDEX (Min)ASTM D-2270108124105125
Flash point °C (Min)ASTM D-92210180210180
SULPHATED ASH, % , MAXASTMD-12980.8750.880.890.89
CORROSION COPPER @150°C 3 HRS MAXASTM D -1301B1B1B1B
Pour point °CASTM D-97-15-30-15-30

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MULTIGRADE GEAR OIL MOTOROL AUTOGEAR 80W/140 API GL-5 & MIL-L-2105E

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
SAE GRADES85W/9080W/9085W/14080W/140
AppearanceVISUALClearClearClearClear
KIN. VISCOSITY @ 100 °C CstASTM D-44514.814.326.725.5
KIN. VISCOSITY @ 40 °C CstASTM D-445138.15106.1338.55263.45
VISCOSITY INDEX (Min)ASTM D-2270108124105125
Flash point °C (Min)ASTM D-92210180210180
SP.GRAVITY @29.5 °CASTMD-12980.8750.880.890.89
CORROSION COPPER @150°C 3 HRS MAXASTM D -1301B1B1B1B
Pour point °CASTM D-97-15-30-15-30

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
GRIP BRAKE FLUID DOT 3 & DOT 4

Motorol Grip Brake Fluid is a type of hydraulic fluid used in brake application in automobiles, light truck. Brake fluids are used to transfer force under pressure from where it is created through hydraulic lines to the braking mechanism near the wheels.

ADVANTAGES

Motorol brake fluids are made from established glycol & ether / poly glycol formulation which offer r a series s of proven advantage in performance and source life, including low compressible, miscibility with water and rubber compatibility.

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
HI-COOL RADIATOR COOLANT

A coolant is a fluid which flows through a device in order to prevent its over heating, transforming the heat forwarded by the device to the other device that utilize or dissipate it . Motorol coolant has a high thermal capacity, low viscosity and is chemically inert, neither causing nor promoting corrosion of the cooling efficiency.

ADVANTAGES

Motorol coolant is a high quality anti-freeze containing sophisticated anti-corrosion additives and is available in both concentrated and diluted form.

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MULTI PURPOSE GREASE

Motorol Multi Purpose Grease a premium quality lithium base grease is manufactured from high quality base oils and selected additives. It is intended for the general use in automotive and commercial applications. Motorol Multi Purpose Grease is also recommended for all types of plain and roller bearings

ADVANTAGES

  • Universal use (multi- purpose)
  • Good wear protection.
  • High load carrying capacity
  • Good pumpability.
  • Resistance to oxidation.
  • High adherence, hence resistance to wash off easily by water.
  • Surfaces protection against corrosion.
APPLICATIONS

  • Stability – Excellent mechanical and oxidation stability to minimize the leakage and premature softening of the grease
  • Rust protection – Outstanding rust and corrosion protection that minimizes the corrosion effect and protects against rust during storage.
  • Water resistance – Good water resistance and will not wash off easily.
  • Sealing – Good sealing which provides protection to equipments operating in wet or dusty conditions.
  • Examples of application - Sleeve-bearing, ball-bearing, articulations, sliders, cams, universal joints, chains and gears.

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
AUTOGEAR EP 90/140 API GL-3 and GL-4

Motorol Autogear EP 90 /140 Gear Lubricants are made from base oil of high natural resistance to the oxidation. High quality, EP Automotive Gear Lubricants designed for application where API GL 2, 3, 4 performance is required.

ADVANTAGES

  • Lower maintenance - Special mild EP additive and corrosion inhibitor system is non-corrosive towards sensitive copper alloy components and protects ferrous metals against rusting in the presence of moisture.
  • Good thermal stability keeps gear cases and bearing clean free from harmful deposits. Longer gear equipments’ life - Special sulphur-phosphorous mild EP additive system provides good load carrying capacity to resist gear tooth wear scoring.
  • Long oil service life - Highly refined base oil and special inhibitor system provide good oxidation stability to resist oil degradation and thickening in service.
APPLICATIONS

  • Automotive manual, synchromesh transmission and transaxles. Particularly where the manufacturers specifically advice the use of GL-4 lubricants.
  • Automotive spiral – bevel and worn gear differential.
  • Automotive steering gears.
  • Tractors and agriculture gear sets and oil lubricated track roller of crawler tractors.
  • Industrial application for which API GL-4 lubricants are suitable.

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
EXCEL PLUS 20W/50 API SL/CF

Motorol Excel Plus is a superior quality and ultra high performance multi grade gasoline oil developed for use in engines operating under severe conditions. It is formulated with the premium quality mineral base stocks and ultra performance additives.

ADVANTAGES

  • Excellent protection against wear, prolongs the engine life.
  • Excellent thermal and high oxidation stability, thereby minimizes the oil thickening.
  • Excellent inhibiting properties against rust, corrosion & varnish formations.
  • Excellent detergency & dispersant to keep the engine relatively clean.
  • Extremely shear stable viscosity index modifies to ensure the ”stay-in-grade” viscosity level both during
  • summer & winter.
  • Excellent prevention of piston deposits and sludge formation.
APPLICATIONS

Ideal for new generation passenger cars, SUV & vans with normal aspirated or turbo charged gasoline & diesel engines.

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
HYFLOW HYDRAULIC OILS 32, 37, 46, 68

Motorol Hyflow Grade Oils blended from highly refined base stock and carefully selected anti-oxidant wear and rust and anti foam additives to meet the requirements of high pressure system and also where pumps of high speed are operated. Motorol Hyflow Hydraulic Oils are premium multi purpose hydraulic fluid conforming to the international classification ISO type HM designed for high pressure highly stressed hydraulic system precision machine tools, industrial equipment and all circulating lubrication systems.

ADVANTAGES

  • Tailor made viscosity to suit hydraulic system.
  • Good film and strength.
  • Excellent anti wear properties.
  • Good demulsibility characteristics.
  • Anti corrosive.
  • Good anti-rusting and oxidation stability.
  • Excellent anti foaming characteristics.
APPLICATIONS

  • Motorol Hyflow grades are effective in reducing vane piston and gear pump wear and so recommended for use in hydraulic system, enclosed gear box claims drivers, compressors, vacuum pumps, mining machinery, machinery tools, oil circulating system . Also used in anti friction bearing of electric motors.
  • Hydraulic oils ISO VG .46 and ISO VG 68 are used popular in earth moving equipment.
  • ISO – VG – 32/37 is used in air line lubricator and compressor as per O E M recommendation.

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
ATF – DX 3*

Motorol ATF – DX 3* is a red dyed ATF designed for use in a modern automotive gear boxes where G M Dexron or Ford Mercon specification are required. This Dexron 3* supersedes Dexron 2*/D, Dexron 2* and Dexron Type A Suffix A specification.

ADVANTAGES

  • Excellent function control for smooth shift action and prevents shudder, thereby minimizing the wear.
  • Excellent low temperature fluidity and high temperature stability.
  • Protection against rust, corrosion & sludge.
  • Good seal compatibility.
APPLICATIONS

  • Recommended to use in automatic gear boxes of passenger cars, trucks, off high way construction, mining and agriculture equipment, where G M Dexron 3* fluids are required.
  • Suitable for power steering and hydraulic systems except where specialist fluids are required.

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
GALLANT 15W/40 API–CH4

MOTOROL GALLANT Engine Oils are designed for naturally-aspirated turbo charged and super charged diesel and gasoline engines found in vehicles. Motorol Gallant Engine Oils are designed for diesel powered vehicles in all major industries from Transporters and Mining to Construction Agriculture and Power Generation.

ADVANTAGES

  • Prolongs engine life with an anti-wear additives system providing excellent protection against wear of critically loaded component under all operations.
  • Reduces maintenance cost by using unique additives technology to disperse soot and maintaining clean engine in all service constructions.
APPLICATIONS

  • All naturally-aspirated and turbo charged four stroke diesel engine oil using high and low sulphur fuels and four stroke gasoline engines.
  • Commercial road transport including the latest electronically controlled engines.
  • Stop-and-go vehicles in high soot loading services such as buses and waste collection truck.
  • OFF high way vehicles and plant machinery including equipments for open cut & underground mining,quarrying and construction.
  • Power generation sets.

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
GALLANT SAE–40 API–CF

Motorol Gallant Engine Oils are designed for naturally-aspirated turbo charged and super charged diesel and gasoline engines found in vehicles. Motorol Gallant Engine Oils are designed for diesel powered vehicles in all major industries from Transporters and Mining to Construction Agriculture and Power Generation.

ADVANTAGES

  • Reduces maintenance cost – High alkaline reserve ensures that corrosive acid formed by the combustion of the fuel sulphur is effectively neutralized, there by minimising corrosive wear without causing valve distress.
  • Maintains high power output – Superior thermal and oxidation stability assists the detergent / dispersant additive system in providing excellent control of high temperature deposits in areas such as the undercrown of the piston and piston ring belt area, enabling piston rings to function efficiently.
  • Prolongs oil change out periods- Superior alkalinity retention characteristics maintain sufficiently high Base Number (BN) under all service conditions.
  • Prolongs service intervals.
APPLICATIONS

  • Medium speed two and four cycle rail road type diesel engines .
  • Including the most recent high out put low oil consumption design whether in railroad, stationary or marine service.

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
GALLANT SAE–50 API–CF

Motorol Gallant Engine Oils are designed for naturally-aspirated turbo charged and super charged diesel and gasoline engines found in vehicles. Motorol Gallant Engine Oils are designed for diesel powered vehicles in all major industries from Transporters and Mining to Construction Agriculture and Power Generation.

ADVANTAGES

  • Reduces maintenance cost – High alkaline reserve ensures that corrosive acid formed by the combustion of the fuel sulphur is effectively neutralized, there by minimising corrosive wear without causing valve distress.
  • Maintains high power output – Superior thermal and oxidation stability assists the detergent / dispersant additive system in providing excellent control of high temperature deposits in areas such as the under crown of the piston and piston ring belt area, enabling piston rings to function efficiently.
  • Prolongs oil change out periods- Superior alkalinity retention characteristics maintain sufficiently high Base Number (BN) under all service conditions.
  • Prolongs service intervals.
APPLICATIONS

  • Medium speed two and four cycle rail road type diesel engines .
  • Including the most recent high out put low oil consumption design whether in railroad, stationary or marine service.

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
EXCEL PLUS 20W/50 API SF/CC

Motorol Excel Plus is a premium engine oil that is ideal for all petrol engines. Motorol Excel Plus Engine Oil is specially made to clean the engine and is suitable for protecting new and older petrol & diesel engines. Motorol Excel Plus is a hard working thick oil, frequently protecting older petrol and diesel engines. It retains its viscosity through out the drain interval.

ADVANTAGES

  • Excellent chemical stability to resist the oil thickening.
  • Helps prolong engine life by minimizing corrosion rust and sludge formation.
  • Good detergency and dispersant to keep engine clean.
  • Excellent anti wear properties.
APPLICATIONS

Ideal for mixed fleets of petrol and diesel engines.

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
EXCEL PLUS 20W/50 API SJ/CF

Motorol Excel Plus is a high performance mineral lubricant for modern generation petrol and diesel engine. It is blended with the high quality mineral base stock and the best available additives to provide the excellent performance and all-round protection.

ADVANTAGES

  • Excellent sludge and oxidation resistance.
  • Excellent wear protection enhance engine life.
  • Excellent rust and corrosion protection of critical engine parts.
  • Use of an advance shear stable VI improver, ensures the ”stay-in-grade” performance.
APPLICATIONS

  • It is recommended for modern cars incorporating any of the following technologies - multi-valve,unleaded or leaded petrol catalytic convertor equipped air conditioning system, turbo charged cars.
  • It is also recommended for moderately severe driving conditions like start stop city driving.

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MULTIGRADE ENGINE OIL MOTOROL EXCEL PLUS SAE 10W30 / 20W50 / 10W40 API SL/CF

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
SAE Grade10W/3020W/5010W/40
KIN. VISCOSITY @ 40 °C CstASTM D-44571.2175114.1
KIN. VISCOSITY @ 100 °C CstASTM D-44510.517.614.5
VISCOSITY INDEX (Min)ASTM D-2270135110130
Flash point °CASTM D-92205215205
SULPHATED ASH, % , MAXASTM D-8740.80.80.8
TOTAL BASE NoASTM D-28966.66.66.6

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MULTIGRADE ENGINE OIL MOTOROL EXCEL PLUS SAE 20W50 / 10W/40 API SJ/CF

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
SAE GRADES20W/5010W40
AppearanceVISUALCLEAR TRANSPARENTCLEAR TRANSPARENT
KIN. VISCOSITY @ 40 °C CstASTM D-445173.55115-160
KIN. VISCOSITY @ 100 °C CstASTM D-44517.512.5-16.3
VISCOSITY INDEX (Min)ASTM D-2270110110
Flash point °C (Min)ASTM D-92215205
SULPHATED ASH, % , MAXASTM D-8740.81
TOTAL BASE NoASTM D-28965.35.3

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MULTIGRADE ENGINE OIL MOTOROL EXCEL PLUS SAE 20W50 / 50 / 40 API SF

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
SAE GRADES20W/505040
AppearanceVISUALClearClearClear
KIN. VISCOSITY @ 40 °C CstASTM D-445166.6199.35148.9
KIN. VISCOSITY @ 100 °C CstASTM D-44517.517.514.7
VISCOSITY INDEX (Min)ASTM D-22701159598
Flash point °C (Min)ASTM D-92220220215
SULPHATED ASH, % (MAX)ASTM D-8740.80.80.8
TOTAL BASE NoASTM D-28965.35.35.3

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MULTIGRADE ENGINE OIL MOTOROL GALLANT 15W/40 API CI 4

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
SAE GRADES15W-/40
AppearanceVISUALClear
KIN. VISCOSITY @ 40 °C CstASTM D-445121.65
KIN. VISCOSITY @ 100 °C CstASTM D-44513.7
VISCOSITY INDEX (Min)ASTM D-2270110
Flash point °C (Min)ASTM D-92210
SULPHATED ASH, % , MAXASTM D-8741
TOTAL BASE NoASTM D-28969.5

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
FLUSHING OIL MOTOROL FLUSHOL

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
CHARACTERISTICSTEST METHODTEST VALUE
ColourASTM D-15002 – 2.5
KIN. VISCOSITY @ 40 °C CstASTM D-44530 - 35
Flash point °C (Min)ASTM D-92180

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
AUTOMATIC TRANSMISSION FLUID MOTOROL ATF DEXRON-3

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
CHARACTERISTICSTEST METHODTEST VALUE
ColourASTM D-1500LIGHT RED CLEAR
KIN. VISCOSITY @ 40 °C CstASTM D-44539.1
KIN. VISCOSITY @ 100 °C CstASTM D-4456.8
VISCOSITY INDEX (Min)ASTM D-2270150
Flash point °C (Min)ASTM D-92170
SP.GRAVITY @30 °CASTMD-12980.845
BROOKFIELD VISCOSITY @ -40°C, 60rpmASTM D-298320000
CORROSION,COPPER STRIP@100°C FOR 3 HOURS, (Max)ASTMD-1301A

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MOTOROL - Brake Fluid Motorol Grip MOTOROL GRIP BRAKE FLUID DOT 3 / 4 / 5

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
TestDOT*3DOT*4DOT*5
Kinematic Vicosity@100°C Cst  Min.1.5 mm 2/s1.5 mm 2/s1.5 mm 2/s
Kinematic Viscosity@ -40°C Cst  Max.1500 mm 2/s1800 mm 2/s900 mm 2/s
Determination pH7.0-11.57.0-11.57.0-11.5
Equilibrium Reflux Boiling Point Min.205 °C230 °C260 °C
Wet Equilibrium Reflux Boiling Point Min.140°C155°C180°C

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MOTOROL - HYDRAULIC OILS HYDRAULIC OILS HYFLOW-10/HYFLOW-32/HYFLOW-46/HYFLOW-68

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
CHARACTERISTICSMETHODHYFLOW-10HYFLOW-32HYFLOW-46HYFLOW-68
Colour MAXASTM D-15001.5222
KIN. VISCOSITY @ 40 °C CstASTM D-4457.5 to 1529 - 3541 - 5061 - 75
VISCOSITY INDEX (Min)ASTM D-227090959595
Flash point °C (Min)ASTM D-92150190200210
SP.GRAVITY @30 °CASTMD-12980.850.870.8750.865
Pour point °C MaxASTM D-97-6-6-6-6
COPPER CORROSION 3 hrs @100°C MAXASTM D -1301A1A1A1A

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MOTOROL - HYDRAULIC OILS HYDRAULIC OILS HYFLOW 100\HYFLOW 150\HYFLOW 220\HYFLOW 320

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
CHARACTERISTICSMETHODHYFLOW 100HYFLOW 150HYFLOW 220HYFLOW 320
Colour MAXASTM D-15002333
KIN. VISCOSITY @ 40 °C CstASTM D-44590 - 110125 - 165198 - 242288 - 352
VISCOSITY INDEX (Min)ASTM D-227095909090
Flash point °C (Min)ASTM D-92210230230230
SP.GRAVITY @30 °CASTMD-12980.880.880.8850.89
Pour point °C MaxASTM D-97-6-6-6-6
COPPER CORROSION 3 hrs @100°C MAXASTM D -1301A1A1A1A

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MOTOROL HI-COOL RADIATOR COOLANT

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
PARAMETERRequirementRESULT
Boiling Point, °C, Min155165
Specific gravity at 20 °C, Min1.11401.137
Freezing point of water solution °C, Max 30 pe-14-18
Freezing point of water solution OC, Max 50 pe-34-36
PH of 30 percent(v/v), water solution7.0 to 11.08.1
Reserved alkalinityReport4.1
Foaming property of 30 percent (v/v), water soluti43 ml
A & C test Metal speciman weight change, mg/cm20.3-0.2867
Aluminium0.3-0.0568
Cast iron0.150.0948
Steel0.15-0.1077
Brass0.3-0.2701
Solder0.15-0.1043
CopperThere shall be no visible corrosion or pittings,
Appearance of specimens after testNo visible foam inside the condenserNo visible foam inside the condenser.
Foaming during test0.5-0.1043

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MOTOROL  MULTI PURPOSE GREASE

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
CHARACTERISTICSGREASE MP2GREASE MP3
TEXTURESMOOTHSMOOTH
SOAP TYPELITHIUMLITHIUM
VISCOSITY OF BASE OIL@100°C15.5 TYP17.5 TYP
DROP POINT °C194198
PENETRATION WORKED268235
PENETRATION UNWORKED270238
OIL SEPARATION%2 TYP2 TYP
RUST TESTPASSPASS
WATER WASHOUT%5 TYP5 TYP
COPPER CORROSION1B1B

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MOTOROL EXTREME PRESSURE GREASE

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
CHARACTERISTICSGREASE EP2GREASE EP3
TEXTURESMOOTHSMOOTH
SOAP TYPELITHIUMLITHIUM
VISCOSITY OF BASE OIL@100°C1918.5
DROP POINT °C194196
PENETRATION WORKED276242
OIL SEPARATION%11
RUST TESTPASSPASS
WATER WASHOUT%55
TIMEN OK LOAD KG1818

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MULTIGRADE ENGINE OIL MOTOROL ADVANCE SAE 10W/40 API SM SEMI SYNTHEIC PETROL ENGINE OIL

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
CHARACTERISTICSTEST METHODTEST VALUE
AppearanceVISUALClear
KIN. VISCOSITY @ 40 °C CstASTM D-445100.05
KIN. VISCOSITY @ 100 °C CstASTM D-44513.5
VISCOSITY INDEX (Min)ASTM D-2270135
Flash point °C (Min)ASTM D-92205
SULPHATED ASH, % , MAXASTM D-8741
TOTAL BASE NoASTM D-28968.3
Pour point °C MaxASTM D-97-33

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MULTIGRADE PETROL ENGINE OIL MOTOROL ADVANCE SAE 10W/40 API SL SEMI SYNTHETIC PETROL ENGINE OIL

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
CHARACTERISTICSTEST METHODTEST VALUETEST VALUE
AppearanceVISUALCLEAR TRANSPARENTCLEAR TRANSPARENT
KIN. VISCOSITY @ 40 °C CstASTM D-445100.05102.05
KIN. VISCOSITY @ 100 °C CstASTM D-44513.513.7
VISCOSITY INDEX (Min)ASTM D-2270135135
Flash point °C (Min)ASTM D-92205210
SULPHATED ASH, % , MAXASTM D-8740.80.8
TOTAL BASE NoASTM D-28967.67.6
SP.GRAVITY @29.5 °CASTM D-970.890.89

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MULTIGRADE PETROL ENGINE OIL MOTOROL ADVANCE SAE 15W/40 API SL SEMI SYNTHETIC PETROL ENGINE OIL

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
CHARACTERISTICSTEST METHODTEST VALUETEST VALUE
AppearanceVISUALCLEAR TRANSPARENTCLEAR TRANSPARENT
KIN. VISCOSITY @ 40 °C CstASTM D-445100.05120.05
KIN. VISCOSITY @ 100 °C CstASTM D-44513.513.7
VISCOSITY INDEX (Min)ASTM D-2270135135
Flash point °C (Min)ASTM D-92205210
SULPHATED ASH, % , MAXASTM D-8740.80.8
TOTAL BASE NoASTM D-28967.67.6
SP.GRAVITY @29.5 °CASTM D-970.890.89

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.
X
MULTIGRADE GEAR OIL MOTOROL AUTOGEAR 85W/90 API GL-5 & MIL-L-2105D

Performance Standard:

IS: 1115 - 1986.

TYPICAL SPECIFICATIONS
SAE GRADE85W/9080W/9085W/14085W/140
AppearanceVISUALClearClearClearClear
KIN. VISCOSITY @ 100 °C CstASTM D-44514.814.326.725.5
KIN. VISCOSITY @ 40 °C CstASTM D-445138.15106.1338.55263.45
VISCOSITY INDEX (Min)ASTM D-2270108124105125
Flash point °C (Min)ASTM D-92210180210180
SP.GRAVITY @29.5 °CASTMD-12980.8750.880.890.89
CORROSION COPPER @150°C 3 HRS MAXASTM D -1301B1B1B1B
Pour point °CASTM D-97-15-30-15-30

Environment, Health & Safety

Every care has been taken to ensure the accuracy of the information in this PDS. This however may be affected by subsequent improvement in the product (R&D). MSDS is available for all MOTOROL products on request. Motorol products are unlikely to present any health and safety hazard with proper use for the correct application and maintain proper personal hygiene. Do not spill oils on the shop floor, discharge into drains, ground or water sources.